Domestic to International transfer at Melbourne airport

Domestic to International transfer at Melbourne airport - Back view of trendy businesswoman carrying baggage before flight near airport building

I am traveling from Adelaide to Chicago with a transfer in Melbourne and L.A. booked through on Qantas. Qantas has changed the flight times, and on my return trip I have 1 hour and 10 minutes to catch my flight in Melbourne to L.A.

What do I need to do when I land in Melbourne before boarding my flight to L.A.? I believe my luggage will be checked directly through to L.A., but what do I need to do in Melbourne as far as security, etc is concerned? I land at 6:50 am. Thanks.



Best Answer

It's Melbourne, so fortunately the airport isn't too big (compared to the separate terminals for Sydney several km from each other).

If it's on the same ticket, no need to worry, Qantas will help you out. You'll land from Adelaide at Terminal 1 (Qantas), and will need to walk off the plane, out the gates, and across to the International departures.

If you're already checked in from Melbourne, you'll have a boarding pass already. If not you'll need to get one.

Then you go through passport control (3-5 min if you are able to use Smartgate - ie if your passport has a chip), and security (metal detector etc) - 5-10 min. At that point it's just a matter of walking to your gate - which in a hurry shouldn't be more than 5-10 minutes.

If you're going to miss it because of a late arrival, speak to the crew on the flight, and they may be able to advise. If it's on the same ticket, Qantas will help out and rebook you and make sure your luggage doesn't get misplaced. In theory ;)




Pictures about "Domestic to International transfer at Melbourne airport"

Domestic to International transfer at Melbourne airport - Through glass modern aircraft parked near airbridge in contemporary airport against picturesque dusk sky
Domestic to International transfer at Melbourne airport - Aircraft flying over runway near airport building
Domestic to International transfer at Melbourne airport - Cheerful female manager checking time on wristwatch standing with bags near bus station



Is domestic and international airport same in Melbourne?

Conveniently, Melbourne's domestic and international airports are located in the same building. With Terminal 1 being a 10-minute walk from Terminal 4, transferring between flights is easy. If you do need assistance, contact any one of the airport staff.

Do I need a visa to transit through Melbourne Airport?

Some citizens are eligible to transit through Australia without a visa if arriving by aircraft. However, their stay in an Australian airport must not exceed 8 hours, they must not need to clear immigration, and they may not leave the airport transit lounge.

Can I transit via Melbourne Airport?

Travellers are permitted to transit through Tullamarine Airport. They must not leave the airport before boarding their flight and must wear a mask for the entirety time they are in the airport and on the flight or when they come in contact with a member of the public.

What terminal is the international terminal at Melbourne Airport?

Terminal 2 (T2) International : all international flights into or out of Melbourne. Terminal 3 (T3) Domestic: Virgin Australia, Regional Express (Rex) Airlines, and Skywest.



Melbourne Domestic to International Terminal and Qantas Business lounge




Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.

Images: Gustavo Fring, ArtHouse Studio, Vincent Albos, Gustavo Fring